Tip Top Electronic Supply Winnipeg - Search Results for 414D

Product Details:
The Fluke® 414D laser distance meter – measures up to 50 meters (165 ft). Fast & easy to use, improves accuracy, reduces measurement errors. Saving time & money

Put the Fluke® 414D on your tool belt and reach beyond the common tape measure. Measures up to 50 meters (165 ft). This professional-grade laser distance meter is fast and easy to use, improving accuracy and reducing measurement errors. You’ll save time and money at every step.

Technical Specifications:
Item	Specifications
Typical measuring tolerance ¹	±2.0 mm ³
Maximum measuring tolerance ²	±3.0 mm ³
Range At Leica Target Plate GZM26	50 m / 165 ft
Typical range ¹	40 m / 130 ft
Range at unfavorable condition ⁴	35 m / 115 ft
Smallest unit displayed	1 mm / 1/16 in
Ø Laser point at distances	6 / 30 / 60 mm (10 / 50 / 100 m)
Tilt Measurement
Measuring tolerance to laser beam ⁵	No
Measuring tolerance to housing ⁵	No
Range	No
General
Laser class	2
Laser type	635 nm, < 1 mW
Protection class	IP40
Automatic laser off	After 90 seconds
Automatic power off	After 180 seconds
Battery life (2 x AAA) 1.5 V NEDA 24A/IEC LR03	Up to 3,000 measurements
Size (L x W x D)	116 x 53 x 33 mm
Weight (with batteries)	113 g
Temperature range	-25°C to +70°C (-13°F to +158°F)
Storage operation	0°C to +40°C (32°F to +104°F)
Calibration cycle	Not applicable
Maximum altitude	3000 m
Maximum relative humidity	85% at 20°F to 120°F (-7°C to 50°C)
Safety	IEC Standard No. 61010-1:2001
	EN60825-1:2007 (Class II)
EMC	EN 55022:2010
	EN 61000-4-3:2010
	EN 61000-4-8:2010

1. Applies for 100% target reflectivity (white painted wall), low background illumination, 25°C.
2. Applies for 10 to 500% target reflectivity, high background illumination, -10°C to +50°C.
3. Tolerances apply from 0.05 m to 10 m with a confidence level of 95%. The maximum tolerance may deteriorate to 0.1 mm/m between 10 m to 30 m and to 0.15 mm/m for distances above 30 m.
4. Applies for 100% target reflectivity, background illumination between 10'000 lux and 30'000 lux.
5. After user calibration. Additional angle related deviation of ±0.01° per degree up to ±45° in each quadrant. Applies at room temperature. For the whole operating temperature range the maximum deviation increases by ±0.1°.