Product Details:
Can break out GPIO, I2C and SPI pins from the 26 pin header onto a solderless breadboard. This mini kit will make "cobbling together" prototypes with the Pi super easy. Designed for Raspberry Pi Model B Revision 1 or Revision 2.
The Pi T-Cobbler mini kit comes with a 26 pin ribbon cable, a custom PCB, ribbon cable socket and header pins. A little soldering is required to put it together.
The T-Cobbler can plug into any solderless breadboard (or even a prototyping board like the PermaProto). The T-Cobbler PCB has all the pins labeled nicely so you can go forth and build circuits without keeping a pin-out printout at your desk. We think this will make it more fun to expand the Pi and build custom circuitry with it.
The Adafruit Pi T-Cobbler is compatible with Model A and Model B both versions 1 and 2 of the Raspberry Pi Computer - for version 2 computers, note that the GPIO #21 has been replaced with GPIO #27 and that the I2C pins are now I2C port #1 instead of #0. All other pins are the same. This Cobbler is not compatible with the Model B+ unless you have a GPIO downgrade cable.
Specifications:
Ribbon Cable Dimensions:
• 173mm x 33mm / 6.8" x 1.3"
• Weight: 14.4g
Pi T-Cobbler (after assembled) Dimensions:
• 55mm x 15mm x 11mm / 2.2" x 0.6" x 0.4"
• Width of T: 40mm / 1.6"
• Weight: 8.5g
|
.jpg)
.jpg)
.jpg)
